Playing a disc – HONDA 2005 Civic Sedan - Owner's Manual User Manual

Page 101

Advertising
background image

To load or play discs, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.

You operate the CD player/CD
changer with the same controls used
for the radio. To select the CD
player/CD changer, press the CD
button. You will see ‘‘CD’’ in the
display. The number of the track
playing is shown in the display. With
the in-dash CD changer, the disc and
track numbers are displayed. The
system will continuously play a disc
until you change modes.

Insert a disc into the slot. The drive
will pull the disc in the rest of the
way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.

You can also play 3-inch (8-cm) discs
without using an adapter ring.

To play the radio when a disc is
playing, press the AM/FM button.
Press the CD button again to switch
back to the CD player.

To play the tape when a CD is
playing, insert a tape in the player
(optional). If a tape is in the player,
press the TAPE button. Press the
CD button again, to switch back to
the CD player.

While playing a disc, you can see the
playing time in the display by
cancelling the clock display (see
page

).

Sampling frequency: 32/44.1/48 kHz
Bit rate: 32/40/48/56/64/80/96/112
/128/160/192/224/256/320 kbps
Compatible with variable bit rate and
multi-session
Maximum layers
(including ROOT): 8 layers

The specifications of the compatible
MP3 file are:

Video CDs and DVD discs will not
work in this unit.

The in-dash CD changer can also
play CD-Rs and CD-RWs
compressed in MP3 standard. When
playing a disc in MP3, you will see
‘‘MP3’’ in the display. You can select
a folder or track up to

.

116

255

On Special Edition models

On models with CD player

(For U.S. Models only)

Optional on DX model

Playing a Disc

To Play a Disc

100

Main Menu

Table of Contents

Advertising
This manual is related to the following products: