HONDA 2005 Civic Sedan - Owner's Manual - Manual (Page 106)

The SCAN function
samples all the tracks on the
selected disc in the order they are
recorded on the disc. To activate the
Scan feature, press and hold the
SCAN button until you hear a beep.
You will see SCAN in the display.
You will get a 10 second sampling of
each track on the selected disc.
Press the SCAN button again to get
out of the system and play the last
track sampled.
Pressing either side of the SEEK/
SKIP bar or selecting a different disc
with a preset button also turns off
the scan feature.
This feature, when
activated, samples all the files on the
selected folder in the order they are
compressed in MP3. To activate the
Folder Scan feature, press and hold
the SCAN button until you hear a
beep. You will see F-SCAN in the
display. The system will then play
the first file for about 10 seconds. If
you do nothing, the system will then
play the following files for 10
seconds each. When it plays a file
that you want to continue listening to,
press the SCAN button again.
Pressing either side of the SEEK/
SKIP bar, selecting a different disc
with a preset button, or a different
folder with the FOLDER bar also
turns off the scan feature.
Press the eject button ( ) to
remove the CD. If you eject the CD,
but do not remove it from the slot,
the system will automatically reload
the CD after 15 seconds and put it in
pause mode. To begin playing, press
the CD button.
Press the AM/FM button to switch
to the radio while a CD is playing. To
play the CD, press the CD button.
If a tape is in the optional tape player,
press the TAPE button to switch to
the tape while a CD is playing. Press
the CD button again to switch back
to the CD player.
In MP3 mode with In-dash CD Changer
Except for Special Edition models
In CD mode with In-dash CD Changer
Playing a Disc
SCAN F-SCAN
To Stop Playing a Disc
Fe
a
tu
re
s
105
Main Menu Table of Contents