Vents, heating, and a/c – HONDA 2005 Civic Sedan - Owner's Manual User Manual

Page 91

Advertising
background image

The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the rear side
panels.

Select

and Fresh Air mode.

Set the fan to the desired speed.
Adjust the warmth of the air with
the temperature control dial.

you can

cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in Fresh Air mode.

Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page

). If it moves near the red zone,

turn off the A/C until the gauge
reads normally.

The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming through the
system.

Set the temperature to the lower
limit.
Make sure the A/C is off.
Select

and Fresh Air mode.

Set the fan to the desired speed.

Turn on the A/C by pressing the
ON button. The indicator in the
button comes on when a fan speed
is selected.
Make sure the temperature set to
maximum cool.
Select

.

If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
Set the fan to the desired speed.

1.

2.
3.
4.

1.

2.

3.
4.

5.

1.
2.
3.

62

If the interior is very warm,

Vents, Heating, and A/C

Ventilation

Using the Heater

Using the A/C

90

Main Menu

Table of Contents

Advertising
This manual is related to the following products: