HONDA 2003 Odyssey - Owner's Manual - Manual (Page 307)

When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant into an
appropriate container, then put the
tank back in its holder. Install a rubber hose on the drain
bolt in the back of the engine
block. Loosen the drain bolt. Drain
the coolant into an appropriate
container.
6.
4. 5.
7.
Cooling System
Maintenance 304
RESERVE TANK RESERVE
TANK CAP
HOLDER
7 lbf·ft (10 N·m , 1.0 kgf·m)
Main Menu Table of Contents