HONDA 2003 Odyssey - Owner's Manual - Manual (Page 77)

This light normally comes on for a
few seconds when you turn the
ignition switch ON (II), and when
the ignition switch is turned to
START (III). If this light comes on at
any other time, there is a problem in
the ABS. If this happens, take the
vehicle to your dealer to have it
checked. With the light on, your
vehicle still has normal braking
ability but no anti-lock. For complete
information, see page
.
This indicator has three functions:
This light also comes on when you
turn the ignition ON (II) and goes off
after the engine starts. See page
for more information on the
TCS.
If it comes on and stays on when
the Traction Control System is on,
it indicates that there is a problem
in the TCS.
It flashes when the TCS is
regulating wheelspin.
It comes on as a reminder that you
have turned off the Traction
Control System.
This indicator comes on for a few
seconds when you turn the ignition
switch ON (II). It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
).
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
1.
2.
3.
90
268
269
Indicator Lights
Instruments and Controls
Anti-lock Brake System
(ABS) Indicator
Traction Control System
(TCS) Indicator Immobilizer System
Indicator
74
U.S. Canada
Main Menu Table of Contents