HONDA 2003 Odyssey - Owner's Manual - Manual (Page 319)

Install the ignition coil. Reinstall
the hexagon socket head cap bolt.
Push the wire connector onto the
ignition coil. Make sure it locks in
place.
Repeat this procedure for the
other five spark plugs.
Reinstall the cover on the front
cylinder bank while putting its
mounting clip in the hole on the
passenger’s side. Secure the cover
by turning the heads of the two
holding clips one-quarter turn
clockwise with a flat-tipped
screwdriver.
Spark Plug Gap:
Reinstall the engine cover and
tighten the four bolts securely.
NGK:
DENSO:
9.
11.
10.
12.
13.
Spark Plugs
Maintenance
Specif ications:
316
PZFR5F-11
PKJ16CR-L11
0.04 in (1.1 mm) 0
0.1 mm
Main Menu Table of Contents