HONDA 2001 Accord Sedan - Owner's Manual - Manual (Page 171)

Audio System
Operation
Select the CD changer by pressing
the CD button. You will see "Cd" in
the display. The system will begin
playing the last selected disc in the
CD changer. You will see the disc
and track numbers displayed.
When that disc ends, the next disc in
the CD changer is loaded and played.
After the last disc finishes, the
system returns to disc 1.
To select a different disc, press the
appropriate Preset button (1 — 6). If
you select an empty position in the
CD changer, the system will go into
the loading sequence (see page 165 ).
You can use the SKIP buttons while
a disc is playing to select passages
and change tracks.
To move rapidly within a track, press
and hold the appropriate SKIP
button. You will hear a beep and the
system will continue to move. Press
the button to move forward, or
the button to move backward.
Release the button when the system
reaches the point you want.
Each time you press the button
and release it, the system skips
forward to the beginning of the next
track. Press and release the
button to skip backward to the
beginning of the current track. Press
and release it again to skip to the
beginning of the previous track.
REPEAT — To activate the Repeat
feature, press and release the RPT
button. You will see RPT in the
display as a reminder. The system
continuously replays the current
track. Press the RPT button again to
turn it off. Pressing either of the
SKIP buttons also turns off the
repeat feature.
RANDOM PLAY — This feature,
when activated, plays the tracks
within a CD in random order, rather
than in the order they are recorded
on the CD. To activate Random Play,
press the RDM button. You will see
RDM in the display. The system will
then select and play tracks randomly.
This continues until you deactivate
Random Play by pressing the RDM
button again, or you select a
different CD with a preset button.
Comfort and Convenience Features
Main Menu Main Menu Main Menu
Main Menu Table of Contents