HONDA 2001 Accord Sedan - Owner's Manual - Manual (Page 245)

Cooling System
1. Open the hood. Make sure the
engine and radiator are cool to the
touch.
Except EX- V6 model
Turn the ignition ON (II). Turn
the temperature control Dial all
the way clockwise. Turn off the
ignition and remove the key.
EX-V6 model
Turn the ignition ON (II). Turn
the temperature control dial to
90°F (32° C). Turn off the ignition
and remove the key.
2. Remove the radiator cap.
4-cylinder models
3. Loosen the drain plug on the
bottom of the radiator. The
coolant will drain through the
splash guard. Remove the drain
bolt and washer from the engine
block.
Maintenance
DRAIN
BOLT
DRAIN
PLUG
6-cylinder models 4-cylinder models 4-cylinder models
Main Menu Main Menu Main Menu
Main Menu Table of Contents