HONDA 2000 Civic Sedan - Owner's Manual - Manual (Page 197)

Cooling System
4. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
5. When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
6. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
With 5-speed manual transmission:
0.82 US gal (3.1 , 0.68 Imp gal)
With automatic transmission:
(U.S.: DX, DX Value Package, LX,
Canada: LX, SE, EX)
0.79 US gal (3.0 ,0.66 Imp gal)
(U.S.: EX)
0.85 US gal (3.2 ,0.70 Imp gal)
7. Pour coolant into the radiator up
to the base of the filler neck. Start
the engine and let it run for about
30 seconds. Then turn off the
engine.
Maintenance
RESERVE
TANK
RESERVE
TANK CAP
HOLDER
FILLER NECK
Fill up to here
Main Menu Table of Contents