HONDA 2000 Civic Sedan - Owner's Manual - Manual (Page 229)

Lights
Replacing a Rear License Bulb
1. Remove the license light assembly
by carefully prying on the edge of
the lens with a flat-tip screwdriver
and pulling the assembly out.
2. Pull the lens from the bulb holder
by pulling the lens while squeezing
the tabs on both sides of the
holder.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Put the lens back on the bulb
holder and push it until it latches.
Put the light assembly back into
the hole. Push it to snap it in place.
Maintenance
Main Menu Table of Contents