HONDA 2000 Civic Coupe - Owner's Manual - Manual (Page 212)

Lights
Replacing a High-mount Brake
Light Bulb
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
3. Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Replacing a Rear License Bulb
1. Remove the two screws and
remove the license light assembly.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
CONTINUED
Maintenance
Main Menu Table of Contents