Changing a flat tire – HONDA 2000 Civic Coupe - Owner's Manual User Manual
Page 226
Changing a Flat Tire
9. Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
10.Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
You could scratch the wheel if you
put it face down.
On DX and EX models in the U.S., and
DX and Si models in Canada
Do not attempt to forcibly pry the
wheel cover off with a screwdriver or
other tool. The wheel cover cannot
be removed without first removing
the wheel nuts.
11.Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully, it may be hot from
driving.
CONTINUED
Taking Care of the Unexpected
WHEEL WRENCH
EXTENSION
BRAKE HUB
Main Menu
Table of Contents