4 bracket adjustment – IC Realtime 3 Megapixel Exmor CMOS 3.3-12mm VF Full HD Network IR-Bullet Camera (ICIPB3000AF) User Manual
Page 23
Advertising
![background image](/manuals/679075/23/background.png)
17
Figure 3-3
3.4 Bracket Adjustment
You can use a M4 inner hex screw to control the bracket. Please use the inner hex wrench from the
installation accessories bag to unfasten the screw. See Figure 3-4.The horizontal angle of the rear
cover can rotate 360°, the tilt angle can rotate 90° and the chassis can rotate 360°.
Please use the inner hex wrench to secure the screw firmly after you complete the setup.
Important
z
Please make sure the M4 inner hex screw is firm, otherwise it may result in chassis vibration and
the camera can not fix to a specified angle.
Figure 3-4
Advertising
This manual is related to the following products: