1 general introduction, 1 overview, 2 features – IC Realtime 3 Megapixel Exmor CMOS 3.3-12mm VF Full HD Network IR-Bullet Camera (ICIPB3000AF) User Manual

Page 7

Advertising
background image

1

1 General Introduction

1.1 Overview

This series IP camera integrates the traditional camera and network video technology. It adopts audio
and video data collection, transmission together. It can connect to the network directly without any
auxiliary device.

This series IPC uses standard H.264 video compression technology and G.711a audio compression
technology, which maximally guarantee the audio and video quality.

It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.

It supports real-time monitor and listening at the same time. It supports analog video output and dual-
way bidirectional talk.

It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
IPC is widely used in many environments such office, bank, road monitor and etc.

1.2 Features

User

Management

z

Different user rights for each group, one user belongs to one group.

z

The user right shall not exceed the group right.

Storage

Function

z

Support central server backup function in accordance with your configuration and

setup in alarm or schedule setting

z

Support record via Web and the recorded file are storage in the client-end PC.

z

Support built-in SD card.

z

Do not support local SD card hot swap storage function. Support short-time

storage when encounter disconnection.

z

Support network storage function such as FTP.

Alarm

Function

z

Real-time respond to external on-off alarm input, and video detect as user pre-

defined activation setup and generate corresponding message in screen and
audio prompt(allow user to pre-record audio file)

z

Real-time video detect: motion detect, camera masking.

Network

Monitor

z

IPC supports one-channel audio/video data transmit to network terminal and then

decode. Delay is within 270ms (network bandwidth support needed)

z

Max supports 20 connections.

z

Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,

MULTICAST, RTP/RTCP, RTSP and etc.

z

Support web access.

Network

Management

z

Realize IPC configuration and management via Ethernet.

z

Support device management via web or client-end.

Power

z

External power adapter DC12V/AC 24V. You can select according to your actual

environments. Please note system can not support these two types of power
supplying at the same time.

Assistant

Function

z

Log

function

z

Support system resource information and running status real-time display.

z

Day/Night mode auto switch.

Advertising