ILY All-in-One Duplicator - Manual (Page 13)

II. Function Introduction
3. The system will detect the source and the target disc automatically.
4. After detecting, the system will start to compare.
The file compared
Total file wait
for compare
Compare process %
5. When the comparison has finished, press to go back to the previous
menu.
**Note:
1 The compare function is to do file by file and bit by
bit comparison. Therefore, compare speed will be affected by
file quantity, total content size and Flash device’s reading
speed.
2 While doing multi-session disc comparison, it is allowed only
one disc to compare with the source.
Disc Spanning Compare
1. Plug a Flash device (ex: USB, SD, MMS…) into the proper slot as source
and place a disc into burner as target for comparison.
2. Select 2. Compare and press to start comparison.
3. The system will detect the source and the target disc automatically.
4. After detecting, the system will start to compare.
13