ILY All-in-One Duplicator - Manual (Page 21)

II. Function Introduction
Function Table-Disc to Disc Duplication
Disc Dupe
When you select Disc duplicate, you
will enter the disc to disc menu; if you
choose Multimedia Dupe, you will only
access the Flash to disc menu.
Function Sub-function Description
1. Copy
To copy disc to disc or copy disc from
HDD.
2. Test To simulate copy process
3. Compare
To bit by bit compare between
source disc and copied discs
4. Copy & Compare
To copy first and compare the
copied discs later.
5. Set Burn Speed To set burning speed for duplication.
6. Select Source
To select source from any optical drive
or hard disk drive.
7. Utility
1. Information
1. Disc Info.
To check the format of disc,
burning speed supported and total
capacity or data size.
2. Drive Info.
To check the version, model No.
and brand name
3. System Info.
To check the model No. and
firmware version
2. Erase Disc
1. Quick Erase To erase data from rewritable disc.
2. Full Erase To erase data from rewritable disc.
3. PreScan Source To check source disc's readability.
4. Track Edit
1. Copy Track
To select and combine audio tracks from
various CDs into a single customized
audio CD.
2. Close Disc
To close the disc after track copying to
make the CD playable on CD player.
3. Disc Info. To check the audio CD’s status of usage.
5. Eject All Disc To eject all trays.
6. Copy Counter
1. Show Count
To c h e c k h o w m a n y d i s c s wer e
c o p ied successfully and failed.
2. Enable Counter To enable or disable counter setting.
3. Clear Counter To delete the record.
7. Update BIOS To update the system’s firmware.
21