2 wall mount plate mounting – Interlogix MC352-4P-2S User Manual
Page 22
Advertising
- 22 -
Step 5:
Lightly pull out the bottom of the switch for removing it from the track.
2.2.2 Wall Mount Plate Mounting
To install the Industrial Gigabit Ethernet Switch on the wall, please follow the instructions described
below.
Step 1:
To remove the DIN-Rail from the Industrial Gigabit Ethernet Switch, loose the screws to remove
the DIN-Rail.
Step 2:
Place the wall mount plate on the rear panel of the Industrial Gigabit Ethernet Switch.
Step 3:
Use the screws to screw the wall mount plate on the Industrial Gigabit Ethernet Switch.
Step 4:
Use the hook holes at the corners of the wall mount plate to hang the Industrial Gigabit Ethernet
Switch on the wall.
Step 5:
To remove the wall mount plate, reverse
the steps above.
Advertising