Interlogix MC352-4P-2S - Manual (Page 5)

- 5 -
1.3 Product Features
Physical Port
 MC352-4P-2S 4-Port 10/100/1000Base-T RJ-45 with IEEE 802.3af/802.3at PoE+ Injector
2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
Power over Ethernet
 Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet Plus End-Span PSE
 Up to 4 IEEE 802.3af/802.3at devices powered
 Supports PoE Power up to 30.8 watts for each PoE ports
 Provides DC 52V power over RJ-45 Ethernet cable to PD with Ethernet port
 Auto-detection of IEEE 802.3af/at equipment and protects devices from being damaged by
incorrect installation
 Remote power feeding up to 100m
Layer 2 Features
 Supports Auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode
 Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow
control (Full-Duplex)
 Automatic address learning and address aging
Industrial Case/Installation
 IP30 aluminum metal case protection
 DIN Rail and Wall Mount Design
 48V DC redundant power with polarity reverse protect function and connective removable
terminal block for master and slave power
 Supports EFT protection 6000 VDC for power line
 Supports 6000 VDC Ethernet ESD protection
 -40 to 75 Degree C operating temperature
Fiber Port Redundancy
 Dual SFP Ports Auto Link Redundant Mode Support
 Link status auto-detect and redundant on Dual ports with same connector type
 Only Primary-Port is active at a time, the Backup-Port is blocked
 While Primary-Port link fail occurrences, the traffic swaps to Backup-Port automatically
 Once the Primary-Port status backs to link up, the traffic swaps from Backup-Port to
Primary-Port