Interlogix NS3550-2T-8S User Manual - Manual (Page 467)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
467
STP Recovery
Description:
Set or show edge port error recovery timeout.
Syntax:
STP recovery [<timeout>]
Parameters:
<timeout>: Time before error-disabled ports are reenabled (30-86400 seconds, 0 disables)
(default: Show recovery timeout)
Default Setting:
Disable
Example:
Set STP recovery value in 30 sec.
NS3552-8P-2S:/>stp recovery 30
STP Status
Description:
Show STP Bridge status.
Syntax:
STP Status [<msti>] [<port_list>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all', default: All ports
Default Setting:
Disable
Example:
Show STP Bridge status.
NS3552-8P-2S:/>stp status
CIST Bridge STP Status