Interlogix NS3550-2T-8S User Manual - Manual (Page 470)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
470
STP Port Mode
Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
Enable : Enable MSTP protocol
Disable : Disable MSTP protocol
Default:
disable
Example:
Enable STP function on port1
NS3552-8P-2S:/>stp port mode 1 enable
STP Port Edge
Description:
Set or show the STP adminEdge port parameter.
Syntax:
STP Port Edge [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
Enable : Configure MSTP adminEdge to Edge
Disable : Configure MSTP adminEdge to Non-edge
Default:
disable
Example: