Interlogix NS3550-2T-8S User Manual - Manual (Page 519)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
519
Parameters:
<inst> : Instance number
set|clear : OAM DEI set/clear
<prio> : OAM PDU priority
<mep> : This MEP id (0-0x1FFF)
no_seq|seq : TST sequence number transmission
<rate> : Transmission bit rate of TST frames - in Mbps
<size> : Size of TST data field in bytes (max 1518)
allzero|allone|onezero: Data pattern to be filled in TST PDU
enable|disable : enable/disable
MEP State
Description:
MEP state get.
Syntax:
MEP state [<inst>]
Parameters:
<inst> : Instance number
MEP Loss Measurement State
Description:
MEP Loss Measurement state get.
Syntax:
MEP lm state [<inst>]
Parameters:
<inst> : Instance number
MEP Loss Measurement State Clear
Description:
MEP Loss Measurement state clear