CatEye OS1.1 - Manual (Page 4)

4 OS 1.1
Setup (CLEAR ALL DATA)
Before first use or to erase all the stored data (Format operation)
To erase all the data stored in the main unit, carry out the format
operation.
1. Hold the unit as shown in the figure.
PRESS AND HOLD the two MODE/SELECT buttons, press and
release RESTART button on the back of the OS. CONTINUE
HOLDING DOWN the two MODE/SELECT buttons for TWO MORE
SECONDS and let go. Now the FORMAT YES/NO prompt will
appear.
2. Select YES and press ENTER/START/STOP button.
Caution: Take note that all the data is erased by this operation. If
you want to stop the formatting operation, select "NO", and
the Clock Time setting screen will appear. Since the clock
has already been returned to its initial setting, set only the
time.
Once format operation is done, the unit needs to be set up from the
first step.
Setup
In addition to Quick Setup that is writ-
ten in the Setup guide, there is Cus-
tom setup (see the next page). In the
Custom setup, you can select only
your favorite functions that you want
to use, and you can also choose your
preferred font size and input your per-
sonal data.
Note: By pressing the two SELECT/
M O D E b u t t o n s s i m u l t a -
neously you can go back to
the next previous screen.
Setup process
Speed scale setting
Tire size setting
Date setting
Time scale setting
Clock time setting
Custom setup entrance
Setup finished
YES
NO
Function customizing
Font size setting
Personal data input
Setup finished
QUICK SETUP CUSTOM SETUP
Goes to previous screen