Specifications, Regulatory information, Contact information – Interlogix ATP1000 User Manual

Page 5

Advertising
background image

ATP1000 Touchpad/Display Installation Instructions

5

used by any bus device. See the specific panel Installation

Instructions for more information on deleting unused unit

numbers.

Specifications

Compatibility

Concord, Concord Express, Concord Ultra

Power requirements

12 VDC nominal (see

Figure 1

for additional

power requirements)

Operating temperature

32° to 120°F (0° to 49°C)

Humidity

95% relative, non-condensing

Dimensions

5.0” x 4.5 x .75” (L x W x D)

Regulatory information

Manufacturer

UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Rd., Arden Hills, MN 55112-6943,
USA

UL listings

UL 985 Household Fire Warning System Units

UL 1023 Household Burglar-Alarm System Units

UL1610 Central Station Burglar-Alarm Units
(Commercial Burglary)

Note: See specific panel Installation Instructions
for complete UL installation requirements for the
system you are installing

FCC compliance

FCC Part 15 Information to the User

Changes or modifications not expressly approved
by Interlogix can void the user’s authority to
operate the equipment.

FCC Part 15 Class B

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against interference in a residential
installation.

This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.

If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:

Reorient or relocate the receiving

antenna.

Increase the separation between the

equipment and receiver.

Connect the affected equipment and

the panel receiver to separate outlets,

on different branch circuits.

Consult the dealer or an experienced

radio/TV technician for help.

Contact information

For contact information, see www.utcfireandsecurity.com or

www.interlogix.com.

For technical support, Toll-free: 888.437.3287 in the US

including Alaska, Hawaii, Puerto Rico, and Canada. Outside

the tool-free area: Contact your dealer.

Copyright © 2011 Interlogix, a UTC Fire & Security Company.

All rights reserved.

Advertising