Interlogix XL 4 Zone LCD - Manual (Page 13)

Multi-Tenant Security System User Guide
22-9050 v1.3 MONITOR ISM™/AFx™ Multi-Tenant Security System User Guide 11
Keypad Tones continued
Tone Type Sound Meanings
Exit with a sensor zone
bypassed Eight short beeps − Warning that arming is occurring with a
protection point or points bypassed.
Key Protest Fast short beeps − Incorrect key presses at keypad.
Key feedback Single fast beep − Whenever a key is pressed.
− No tone when emergency keys and # are
pushed together on the 8 zone keypad.
Key Confirmation Single long beep − Confirms that a command sequence was
correctly entered at a keypad.
Alarm notification when
entering main entrance High speed pulsed
tone − There was an alarm when the system was
armed.
Alarm occurred during the
last time the system was
armed Single short beeps − These beeps occur when the system is being
turned off and there had been an alarm while
it was armed.
Exit With Trouble Single high speed
beeps − Arming system while trouble condition exists.