38 setting up the vcr plus+ programming system – Philips CCB 134AT User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR
Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers, and
since channel numbers differ from area to area, you must program theTV/VCR with your local channel
information.To fill in the boxes, you will need I) a cable channel line-up list, if applicable (you can request
one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in
your TV guide or the TV listings of your local newspaper,
NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04 (the Cable
Box/DBS output channel) for every VCR Plus+ channel.
38 Setting Up the VCR Plus+ Programming System
TV Channels
Station
Call Letters
VCR PLUS+ CH.
CABLE/TV CH.
TV Channels
Station
Call Letters
VCR PLUS+ CH.
CABLE/TV CH.