Glossary 63 – Philips CCB 134AT User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Glossary 63
AUDIO In lack;
jack located on the front of the TV/VCR which
is used to record audio from another source.
Automatic Channel Setup:
process in which the TV/VCR.
scans all available channels and places the ones you receive in its
memory.Then, when you push the CHANNEL buttons, you
only scan through channels you receive.
Bands:
settings that allow you to tune channels.
• Antenna
- VHP {very high frequency; channels 2-13) and UHF
(ultra high frequency: channels 14-69),
• Cable
- all standard channels can be received without a Cable
Box.
Brightness:
adjusting increases or decreases the brightness of
the color on the screen.
Color:
adjusting pales or brightens the TV/VCR color.
Dubbing:
copying a tape using a VCR.
HQ:
high quaiity: a feature in the TV/VCR circuitry which pro
vides enhanced picture detail.
Line Input:
The channel to which you set your TV/VCR during
dubbing.The line input channel is always channel 00 (A/V IN).
Mode:
a TV/VCR operation.
OTR:
One-Touch Recording; a timed recording that starts imme
diately and records for 30 minutes to eight hours, whichever you
specify.
Picture:
adjusting increases or decreases the contrast of the pic
ture on the screen.
Sharpness:
adjusting softens or clarifies the picture on the screen.
Tape Speeds:
how fast the tape travels during playback or
recording.
• SP
(standard play) - ästest tape speed (recording time for a
TI20 tape is approximately two hours); best picture quality.
• LP
(long play) - average tape speed; playback only.
• SLP
(super long play) - slowest tape speed (recording time for
aTI20 tape is approximately six hours).
Tint
adjusting changes the tints of the picture on the TV/VCR from
purple to green.
VIDEO In lack:
jack located on the front of the TV/VCR which
is used to record video from another source.