Corinex Global Powerline Router - Manual (Page 105)

7 Appendix D: Finding the MAC address and IP
address of your computer’s Ethernet Adapter
This section describes how to find the MAC address of your Ethernet
adapter of your computer to do either MAC Filtering or MAC Address
Cloning for the Router and ISP. You will aslo learn how to find the IP
address of your computer’s Ethernet adapter. The IP address is used for
filtering, forwarding, and DMZ. Follow the following steps in this appendix
to find the MAC or IP address for your adapter of your Windows 95, 98,
Me, NT, 2000, XP, Linux on Macintosh computer.
7.1 For Windows 95, 98 and Me
1. Click on Start and Run. In the Open field, enter winipcfg. Then
press the Enter key or the OK button.
Fig. 7.1 Running winipcfg
2. When the IP Configuration window (Fig.7.1) appears, select the
Ethernet adapter you are using to connect to the Router via a CAT
5 Ethernet cable or through the powerline.
3. Write down the Adapter Address as shown on your computer
screen (see Figure 7.1). This is the MAC address for your Ethernet
adapter and will be shown as a series of numbers and letters.
The MAC address/Adapter Address is what you will use for MAC
Address Cloning or MAC Filtering.
102
Appendix D: Finding the MAC address ...
Corinex Powerline Router User Guide