Corinex Global Powerline Router - Manual (Page 37)

4. Close the Network panel, saving your settings.
Note: If using manually assigned IP addresses instead of DHCP, the
required changes are:
• Set Router address field to the Corinex Powerline Router’s IP
address.
• Ensure your DNS settings are correct.
Fig.2.24 TCP/IP settings - Manually
Configuring other clients
For fixed IP Addresses:
Ensure the Gateway field for your network port is set to the IP address of
the
Corinex Powerline Router
Ensure your DNS (Name Server) settings are correct.
For DHCP:
Ensure the TCP/IP address settings of your Network port are set to DHCP
or Automatic.
34
Step 2: Configuring Computer
Corinex Powerline Router User Guide