Corinex Global Powerline Router - Manual (Page 58)

Client IP Filters
Select the Client IP Filters tab from the Advanced Settings tabs. The
following screen will appear:
Fig.3.16 Client IP Filters
Using this screen you can limit the access to the Internet/WAN to certain
computers/hosts on the LAN side of the network. For doing this you have
to enter the IP address and Port of the chosen computer, select the Type
(TCP, UDP, Both). You can choose between limiting the computer for all the
time (Always field) or select the time range in the Block Time and Time
fields.
After you have entered the values in this screen, you can set them up by
clicking on the Submit Query button.
55
Advanced Settings
Corinex Powerline Router User Guide