24 hours reset, Press 24 hr reset, Alarm – Philips MAGNAVOX AJ 3940/17 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SEHING BUZZER MELODIES

ALARM

You can set 4 different melodies for both alarm 1 or 2. The buzzer

melodies are set at a fixed volume and cannot be adjusted.

/. Press and hold down the selected ALM 1 or 2 button and set

your alarm time using the or controls.

2. Before releasing ALM 1 or 2 press the BUZZER button.

-* The display will show the buzzer icon under A ALM 1

or ▼ ALM 2.

3. Hold down BUZZER and press or ►» repeatedly until you

find the desired melody.

- The buzzer melody and alarm number will be shown and

the buzzer melody played as long as you press BUZZER

4. To review your selected buzzer melody over the speakers,

press BUZZER.

SWITCHING OFF THE ALARM

There are three ways to switch off the alarm. Unless you cancel

the alarm completely, the 24 HR RESET will be automatically

selected after 59 minutes, from the time your alarm goes first off.

24 hours reset

If you want the alarm mode to be stopped immediately but also

wish to retain the same alarm setting for the following day;

7. Press 24 HR RESET

You will hear a long beep tone to confirm that the 24 HR

RESET has been activated.

day

/REPEAT ALARM

This will repeat your alarm call at 9 minutes intervals.

7. During the alarm call, press

day

/REPEAT ALARM.

—After 9 minutes the alarm will call again.

2. You can press

day

/REPEAT ALARM again as often as

desired.

— The icon of your selected alarm , 0 or

O

and ' ' in

the display will flash throughout the time when

day

/REPEAT ALARM is active.

13

Advertising