Philips STU130A - Manual (Page 14)

Audio frequencies
The user can chose between two modes:
1) Pre-programmed audio frequencies
o
Press P-AUD on the remote control to obtain the chosen audio frequency,
s- First press: Display P-A
>- Next presses: Switch to pre-programmed frequencies
o
Press «STORE» to memorize your choice.
>- A01-A05 in MONO/LARGE
A06-A013 in MONO/NARROW
»A14-A17inSTEREO
Refer to the following table
Display
Right
Frequency
MHz
Left
Frequency
MHz
Mode
A01 6.50
_
MONO 50 p
A02 6.60 - MONO 50 p
A03 6.65 - MONO 50 p
A04 5.80 - MONOJ17
A05 6.60 - MONOJ17
A06 7.02 - MONO 75 p
A07 7.20 - MONO 75 p
A08 7.38 - MONO 75 p
A09 7.56 - MONO 75 p
AIO 7.74 - MONO 75 p
All 7.92 - MONO 75 p
A12 8.10 - MONO 75 p
A13 8.28 MONO 75 p
A14 7.02 7.20 STEREO 75 p
A15 7.38 7.56 STEREO 75 p
A16 7.74 7.92 STEREO 75 p
A17 8.10 8.28 STEREO 75 p
2) Manual tuning of the audio frequency
o
Press the AUDIO ^ V remote control.
5- The corresponding frequency to the programme is displayed,
o
Press once more on AUDIO A V to adjust the audio frequency of your choice,
o
Press «STORE» to memorize your choice.
It is also possible to enter directly the audio frequency through the numerical keyboard.
o Press AUDIO A V-
The corresponding frequency is displayed,
o Enter directly the 3 digits of the chosen frequency -eg: 6-5-0-
o Press «STORE» to memorize your choice.
1 0