How to connect your audio stereo equipment, Installing your remodulator, Installing your modulator – Philips STU130A User Manual
Page 9: Connections & installation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections & installation
This chapter explain how to connect your satellite receiver to equipments you already have, such as TV-
set and video-recorder.
o According to your different possibilities, make the connections as follow:
Once the connections are made, except the antenna connection, proceed as follow:
o Connect your TV-set as well as your video-recorder on mains and switch them ON.
o Connect your satellite receiver on mains.
How to connect your audio stereo equipment
If you wish to use your Hi-Fi system to listen to programmes, you must connect your stereo installation
into the AUDIO cinch connectors on the rear panel of your receiver.
o Connect the «AUDIO L» -Left channel- and the «AUDIO R» -Right channel- plugs into the right and left
input cinch connectors of your stereo equipment.
Do not connect «AUDIO L/R» into the «PHONO» sockets of your stereo equipment.
Installing your remodulator
If you have made coaxial cables antenna connections only you must create a new programme. You must
create a new programme on your TV-set -and your video-recorder- to be able to watch satellite program
mes. To do that:
o Place the switch «TSG» -on the rear panel- on the «ON» position.
o Make sure on your TV-set that the reception of terrestrial channels as well as on your video recorder is not
disturbed.