Philips STU130A - Manual (Page 8)

1
]
Introduction
Safety-related instructions
Dangerous voltage inside. Do not open the cabinet. Repairs should be carried out by qualified service
personnel only.
To avoid short-circuits, which may cause fire or electric shock, do not expose this Philips satellite receiver
to rain or moisture.
Before connecting the receiver to the mains, check that the mains supply voltage corresponds to the
voltage printed on the label on the receiver base. If the mains voltage is different consult your dealer.
Ensure that no objects or fluids pass through the ventilation openings, if liquid is spilt into the receiver,
disconnect the receiver from the mains and consult a qualified service technician.
Ensure that air can circulate freely through the ventilation openings of the receiver. Leave a space of at
least 3 cm all around the receiver.
Do not place your receiver close to an external source of heat (radiator, etc.) or near appliances
generating strong magnetic fields (e.g. motors, transformers).
Do not use your receiver in dusty places or where it may be subject to vibration.
Avoid using your receiver immediately after moving from a cold to a warm location and vice versa, or
under conditions of high humidity.
If you have to transport your receiver, avoid violent shocks.
For cleaning, use a damp chamois leather. Never use an abrasive.
Your receiver supplies 14 or 18 V DC voltage to your satellite dish antenna. Make sure you connect only
your satellite dish to the satellite dish inputs, and nothing else.
Never connect or modify cables while the receiver is connected to the mains.
Do not connect your receiver to the mains yet, but continue reading these instructions.