Operation – Philips CD 608 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION
(A
3
"
You can also press PLAY/REPLAY immediately
after inserting the CD; the CD compartment
then closes automatically.
- The track number indicator shows how many
tracks there are on the CD.
- The track being played is always shown under
TRACK and its elapsed playing time is shown
under TRACK TIME.
- Each time a track has been played, the corre
sponding number goes out on the number indi
cator.
- After the last track play stops.
- The display shows the number of tracks and
the playing time of the CD (TOTAL TIME).
• Press ON/OFF to switch the player off.
You can interrupt playback by pressing PAUSE; />
then starts flashing. Press PLAY/REPLAY to re
start.
If you press PLAY/REPLAY during play, the cur
rent track starts again from the beginning.
You can stop playback by pressing STOP/CM or
OPEN/CLOSE.
CALLING UP OTHER TIME INFORMATION
(TIME)_____________________________________
• Press TIME whenever you want to know the
remaining playing time of the track being
played (REM TRACK TIME).
• Press TIME again if you wish to know the re
maining playing time of the entire disc (TOTAL
REM TIME).
• Press TIME again if you wish to return to the
elapsed playing time indication (TRACK TIME).
SELECTING ANOTHER TRACK DURING
PLAY (1-0 or NEXT and PREVIOUS)_____________
• Key in the desired track number (numbers con
sisting of two figures must be keyed in within
2 seconds!)
or press NEXT or PREVIOUS until
the number appears under TRACK.
- The music stops and a moment later the selec
ted track begins to play.
FAST SEARCH FOR A PASSAGE (« M>)
• Hold <M down to search backwards.
• Hold t» down to search forwards.
The searching speed is determined by how long a
key is pressed:
- the first 2 seconds fairly slowly, with sound;
- then at maximum speed, with no sound.
If you reach the end of the last track of the CD
and release w>, play will resume a few seconds
before the end.
STARTING WITH A PARTICULAR TRACK
(1-0 or NEXT and PREVIOUS and PLAY/REPLAY)
• Close the CD compartment by hand or by
pressing OPEN/CLOSE.
- The display shows the number of tracks and
the playing time of the CD.
• Key in the desired number (numbers consisting
of two figures must be keyed in within 2 sec
onds!)
or press NEXT or PREVIOUS until the
number appears under TRACK.
• Now press PLAY/REPLAY within 8 seconds.
-
Play starts from the selected track.
PLAYING IN A RANDOM ORDER (SHUFFLE)
• Press SHUFFLE before or during play.
- If the CD compartment was open it will now
clos6
- SHUFFLE lights up.
- The tracks are now played in a random order.
• Press SHUFFLE again if you wish to revert to
normal play.
If you press PREVIOUS, you will return to a track
which has already been played. If you press
NEXT, you are selecting any other track.
If you press REPEAT, the tracks will be repeated
in a different order each time.
SCANNING THE DISC (SCAN)__________________
• Press SCAN before or during play.
- If the CD compartment was open, it will now
close. — lights up and the first 10 seconds of
each track are played in turn.
• When the player reaches a track which you
wish to hear in full, press SCAN again or
PLAY/REPLAY.
During scanning, the 1-0 digit keys and PREVI
OUS and NEXT can be used.
REPEATING A PASSAGE (A-B)_________________
• During play press A-B at the required starting
point.
- A lights up.
• Press A-B again at the required stopping point.
- -B lights up. The passage between points A and
B will now be replayed continuously.
• Press A-B again if you wish to return to normal
play.
To find the starting and stopping points quickly,
you can use the «t» keys.
REPEATING A CD (REPEAT)___________________
• Press REPEAT before or during play.
- REPEAT lights up and the CD will now be re
peated again and again.
• Press REPEAT again to stop the REPEAT func
tion.