C r r, 6eneral, D o c/1 – Philips AJ 3940/05 User Manual

Page 5: No co

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

-D

O

C/1

CD PUYBACK

/. Press

PUSH«OPEN to open the CD door.

2.

Insert a CD with the printed side facing up, and press the

door to close.

3.

Press

PLAY ► to start playback.

— The CD indicator

,'cd- - ‘

appear, ' - -' flashes

briefly in the display followed by the total number of tracks

and the current track number.

door will be displayed if you have not closed the CO door.

— If no CD has been inserted, the CD indicator will disappear

from the display,

"no Cd' flashes followed by 'Err'

indicating an error in CD operation has occurred.

The display reverts to show the clock time.

— At the start of each track, the track number will be

displayed briefly and the CD indicator will remain

throughout CD playback.

4.

Adjust the sound by using the

VOLUME and DBB controls.

5.

To check the current track number during playback,

press

PLAY ►.

6.

Press ■

OFF to stop playback.

The CD indicator disappears from the display and the CD

player is switched off.

— The CD player is automatically switched off after the last

track.

Selecting a different track

During playback, to jump to the next or a previous track, press

SEARCH m or once more until the desired track number

appears in the display.

Finding a passage within a track

1.

During playback, press and hold down the

SEARCH r« or

button.

— The CD is played at an increasingly high speed and low

volume: the display will show

'Cd:' and your current track

number.

2.

Release the

SEARCH r« or »i button when you recognize

the passage you want. Normal CD playback and the clock

display will resume.

^

c o. “ “

no CO

^ c r r

DBB

o »

»vrii

¡¡t .*!

About slumber time
The clock radio has a built-in device called the slumber, which

enables the set to be automatically switched off during radio

playback after a set period of time. There are three slumber

times: 60,30 or 10 minutes before the set turns itself off.

Setting the slumber

1.

Press the

PLAY ► or RADIO button.

— For the CD mode, make sure you have inserted a disc first.

2. Select your slumber time by pressing the SLUMBER once or

more until the desired slumber time is shown.

— The SLUMBER indicator

will appear on the bottom

of the display when slumber is active.

3. To cancel the slumber function, you can:

- press the

SLUMBER button until the word disappears

from the display:

- press ■

OFF, RADIO or PLAY ► to cancel immediately

and switch off the set.

CO

H

73

c

o

H

o

2

CO

"n

O

73

c

CO

m

6ENERAL

If you do not intend to use your CD clock radio for a long

time, withdraw the plug from the wall socket.

Do not expose the set or CDs to humidity, rain, sand, or

excessive heat caused by heating equipment or direct

sunlight.

A chamois leather slightly moistened with water is sufficient

for cleaning the housing. Do not use cleaning agents

containing alcohol, spirits, ammonia or abrasives as these

may harm the housing.

CD PLAYER AND CD HANDLING

- The lens of the CD player should never be touched.

- Tbe lens may cloud over if the set is moved from cold to

warm surroundings. The CD player will not start. Give the

player some time to acclimatize.

- To take a CD out of its box, press the centre spindle while

lifting the CD. Always pick up the CD by the edge and

replace the CD back in its box after use to avoid scratching

and dust.

- To clean the CD, wipe in a straight line from the centre

towards the edge using a soft, lint-free cloth. Do not use

cleaning agents as they may damage the disc.

- Never write on a CD or attach stickers to it.

Advertising