Philips CDI210/73 - Manual (Page 5)

INSTALLATION
PLACEMENT POWER CONNECTION
Place the player on a firm, flat surface.
Keep away from heat sources and direct sunlight.
In a cabinet, allow 2-3 cm (approx. 1 inch) of free space all
around the unit for adequate ventilation.
REAR OF PLAYER
8 AC Power (alternating current) input socket.
9 Extension socket for 22ER9956 (already installed in some
player versions).
10 Input port for CD-i serial connections (Not for pointing
devices).
11 Audio output R.
12 Audio output L.
13 Video output (CVBS).
14 h/V Euroconnector*.
15 Channel selector*.
16 Out to TV*.
17 In from antenna*.
18 +5V/Audio out (for optional RF-modulator)*.
• For any optional connection accessories you require, contact
your supplier.
• Connect the female end of the AC (alternating current) cord
supplied into the AC socket (8).
• Insert the male end of the cord into an AC oudet.
CAUTION
NEVER MAKE OR CHANGE CONNECTIONS WITH THE
POWER SWITCHED ON.
ONLY A QUALIFIED SERVICE PERSON SHOULD REMOVE
THE COVER OR ATTEMPT TO SERVICE THIS DEVICE.
USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE OR OTHER UNSAFE OPERATION.
THE PLAYER AUTOMATICALLY ADJUSTS TO THE LOCAL
MAINS VOLTAGE.
WHEN THE PLAYER IS IN THE "OFF" POSHTON, IT IS STILL
CONSUMING SOME POWER. IF YOU WISH TO DISCONNECT
YOUR PLAYER COMPLETELY FROM THE MAINS, THE MAINS-
PLUG HAS TO BE DISCONNECTED.
*Available on some player versions only.