Philips AZ8075 - Manual (Page 10)

CASSETTE RECORDER
m
3
o5‘
iPlaying a cassette
1 Set the POWER selector to TAPE/0FF.
2 Press STOP-OPEN ■ to open the cassette compartment.
3 Insert a recorded cassette with the open side downwards.
4 Press PLAY ► to start playback.
5 By pressing or ►► fast winding of the tape is possible in both
directions.
6 To stop the tape, press STOP-OPEN ■.
Note: The keys are automatically released at the end of the tape.
\
General information on recording
Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
For recording on this set you should use a cassette of the type
"NORMAL" (lEC type I). This deck is not suited for recording on
cassettes of the type "CHROME" (lEC n) or "METAL" (lEC IV).
The recording level is set automatically. The controls VOLUME
and DBB and INCREDIBLE SURROUND do not affect the
recording.
At the very beginning and end of the tape, no recording will take
place during the 7 seconds when the leader tape passes the
recorder heads.
Protecting tapes from accidental erasure
Keep the cassette side to be safeguarded in front of you and
break out the left tab. Now, recording on this side is no longer
possible.
To render this safeguard ineffective, cover the aperture with a
piece of adhesive tape.
\l
j
1
1
. £ o . o J .1
10