Philips AZ8075 - Manual (Page 9)

CD PLAYER
Programming track numbers
¡2
c
LU
You may select a number of tracks and store these in the
memory in the desired sequence. You may store any track more
than once. At most, 20 tracks can be stored in the memory.
1 Select with SEARCH r« or the desired track.
2 As soon as the desired track is displayed, press the PROG button
to store the track in the memory.
-►On the display
program
appears and P lights briefly up.
After that the stored track number is shown.
3 Select and store in this way all desired tracks.
• You can review your settings by pressing the PROG button for
more than 2 seconds.
-►The display shows in sequence all stored track numbers.
|!
•i
'\ , -----------
a
’ o
/ i«i y
/ \ /
/ ° }
o
c
Display indication:
when you store a track.
Display indication
when you tiy to store
more than 20 tracks.
Playing the program
If you have selected the tracks in the STOP position,
press PLAY-PAUSED.
If you have selected the tracks during CD play, press first STOP I
and then press PLAY-PAUSE ►.
n o
U L ^
Example
Display indication when
you play the program.
[Erasing the program from the STOP position
From the stop position, press STOP ■.
-►PROGRAM disappears on the display and your program is
erased.
Note: The program will also be erased
-
if you interrupt the power supply:
-if you open the lid or
- if you move the POWER selector.
no
Display indication when
you erase a program.