Philips DV900VHS0I - Manual (Page 17)

Automatic Channel Setup 17
Although your DVD/VCR may automatically memorize the chan­
nels you receive when you turn it on for the first time, this func­
tion lets you set up the channels again.
• Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press theVCR/TV button so that
theVCR/TV light appears on the front of the DVD/VCR.
I
Press the VCR button^ then press the MENU button.
SÉLECT AT CHOOSE!
+ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
TUNER SET UP, then press the F.FWD button.
SELECT AT CHOOSER
^ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
ON
2ND AUDIO
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select AUTO
PROGRAMMING, then press the F.FWD button. The
DVD/VCR will memorize all the channels you receive.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
Vnilllllllihmmmii
4
Wait for a few minutes while the DVD/VCR sets up the
channels. When this is complete, CHANNELS ARE SET will
appear on the screen.Then the programming of the lowest channel
number placed in the DVD/VCR’s memory will appear on the
screen. Now when you press the CHANNEL buttons, you
will scan only through channels you receive.
Helpful Hinu
You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002. AV REAR or AV FRONT will
appear on the screen briefly.
You can not program channels if you
are using a Cable Box or DBS.
If you have an antenna, channels 2­
69 will be available. If you have a
cable connection, channels 1-125
will be available.