Philips DV900VHS0I - Manual (Page 43)

TimeSeorch 43
Follow the steps below to program the DVD/VCR to search for­
ward or backward on a tape a specific length of time.There must
be a tape in the DVD/VCR.
• Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press theVCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
Press the VCR button, then press the SEARCH
MODE/TIME SEARCH button.
TIME SEARCH
0:00
EN#R SEARCH TIME
2
Within 10 seconds, use the Number buttons to enter the
desired length of time you want to skip forward or back­
ward. For example, for I hour, 25 minutes, press Number buttons
1,2, 5. Or, for five minutes, press Number buttons 0,0, 5.
3
Within 10 seconds, press the F.FWD button or the
REW(ind) button. The DVD/VCR will skip over the specified
length of time, then begin playback.
Hinm
If you want to search for more than
59 minutes, you must enter the
length of time in hours and minutes.
For example, to search forward 70
minutes, press 1,1,0 at step 2.
You con not do a Time Search while
recording.
To remove the Time Search display,
press the SEARCH MODE/TIME
SEARCH button again.
To cancel o Fime Search that is in
progress, press the STOP button.
If the end of the tape is reached
during a Time Search, the Time
Search will be cancelled.The
DVD/VCR may rewind the tape.
Details are on page 45.