Casablanca Fan Company Holliston C31UxxZ - Manual (Page 11)

9
H
olliston
™
fan preparatIon
Perma•LoCk™ Hardware (not to scale)
iMPoRtant SaFetY inFoRMation:
Before starting the installation of your
ceiling fan, install the threaded downrod into
the motor coupling and lock the assembly.
allen Wrench Perma•Lock™ downrod
and Ball assembly
(6) 7-Watt
uplight Bulbs
PaPeR MotoR
ShieLd
Figure #1
Figure #2
hanging adapter Cover
Figure #3
Prepare for fan installation as follows:
Step 4a. Remove the paper shield from the motor as
shown in Figure #1.
Step 4b. using the provided Allen wrench (attached
to the paper motor shield), loosen the Allen set screw
making sure that end of the Set Screw can not be
seen within the motor coupling as shown in (Figure
#2). If so, you will need to unscrew the Set Screw so
that the tip of the Set Screw does not remain in the
path of the downrod as shown in (Figure #3).
Caution: Failure to fully lock in the
downrod before securely tightening the
allen set screw may cause the fan to
separate from the downrod and fall during
normal operation.
Canopy Cover
Ring