Casablanca Fan Company Holliston C31UxxZ - Manual (Page 16)

14
Caution:
Blade screws must be tightened securely
before operating the fan.
Figure #5
FLYWheeL
Blade installation Continued
Step 10b. Attach a blade/blade iron assembly to the
flywheel by using two blade iron screws provided.
Place the end of the blade iron on the flywheel as
shown in Figure #5. Insert the screws one by one
using the provided screwdriver. tighten securely by
hand only. Repeat for each blade/blade iron assembly
until all five blades are attached to the fan as shown
in Figure #6.
Figure #6
lIGHt fIXtUre InStallatIon (optIonal)
NotE: If you are installing your fan without a light kit attached as below in Figure #1, continue with these installation
instruction Step 11a. If you have purchased a light kit for installation on your fan, skip this section and go to Step
13a on page 18 within this document.
Figure #1