2 slc 8cap: physical description, Reset switch, Led indicators – Cisco 6200 User Manual
Page 24: Figure 1-11 slc 8cap faceplate
Advertising
1
Hardware Description
78-5296-02
10/02/98
Cisco 6200 User Guide
1-24
1.5.2 SLC 8CAP: Physical Description
Up to 10 SLCs can be installed in a Cisco 6200 cabinet. The cabinet slots assigned to the SLCs are
slot 5 through slot 14.
The CAP SLC’s faceplate is labeled SCL 8CAP. The faceplate (Figure 1-11) includes the fixtures
discussed in the following paragraphs.
Reset Switch
The reset switch is recessed behind the faceplate to avoid accidental activation. It is not for customer
use.
LED Indicators
Table 1-9 describes the LEDs on the faceplate of the SLC.
Figure 1-11
SLC 8CAP Faceplate
11947
SLC
8CAP
PORTS
1
2
3
4
5
6
7
POWER
READY
PRIME
SEC
0
Card status LEDs
Port status LEDs
Reset switch
Advertising