Jaypro Sports FBGP-920AX - Manual (Page 11)

WWW.JAYPRO.COM P a g e 11 11/1/13
1. Hook one end of the #43, 2-inch S hook into the streamer eyelet and crimp the
hook with pliers .
2. Hook the other end of the S hook into the ¼’-20 eye-bolt and crimp the hook
with pliers.
3. Thread the ¼”-20 jam nut onto the eye-bolt, and thread the eye-bolt into the
upright cap.
4. Tighten the jam nut against the end cap.
5. Repeat the above steps for the other wind streamers.
Figure 6: Installing the Wind Streamers
8 Install the End Fittings & Uprights
Follow the steps below to install the end fittings and uprights. (See Figure 7)
8.1 Preliminary Installation of First Upright and End Fitting
Key
1—42-inch streamer
2—endcap
3—1/4”-20 hex nut
4—1/4”-20 eye bolt
5—#43 x 2-inch S-hook