Jaypro Sports FBGP-920AX - Manual (Page 14)

WWW.JAYPRO.COM P a g e 14 11/1/13
3. Check that the upright is still plumb once at the 34 inch position. Follow the
procedures in Section 8.1 Steps 8 and 9 to install the 7 ½ inch long bolts at the
High School position.
4. Now go to the other end and install the upright to the High School position
repeating the procedures as outlined in Section 8.4 numbers 1 through 3.
Figure 7: Installing End Fittings and Uprights
ITEM QTY DESCRIPTION ITEM QTY DESCRIPTION
2 1 ADJ CROSSBAR 7 8 ½-13 NYLON LOCK NUT
3 2 END FITTING 8 8 ½ in FLAT WASHER
4 2 20’ UPRIGHT 11 2 ANTI ROTATION BOLT
5 4 ½-13 x 7 ½ In HX HD BOLT 14 4 ¼-20 x 1/4 in SET SCREW CONE POINT
6 4 ½-13 x 5 in HEX HEAD BOLT 15 2 ¼-20 x 1/4 in SET SCREW NYLON TIP