Jaypro Sports FBGP-820AX User Manual
Page 13
Advertising

WWW.JAYPRO.COM
Page 13
11/1/13
a. It is strongly recommend that an 11/16” transfer punch be used to locate
the holes to ensure correct alignment of the holes.
8. Install a 5/8”-11 x 10-3/4”-long threaded anti-rotation rod through the holes in
the ground sleeve (and through the holes drilled in step 7, above).
9. Install two 5/8” washers and two 5/8”-11 nuts on the ends of the anti-rotation
rods.
Advertising
This manual is related to the following products: