Jaypro Sports FBGP-820AX - Manual (Page 16)

WWW.JAYPRO.COM Page 16 11/1/13
b. Tighten the 1/2”-13 jam nuts against the ground sleeve.
11. Drill two 5/8” holes in the gooseneck using the pre-drilled holes in the ground
sleeve for location and alignment.
a. It is strongly recommend that an 11/16” transfer punch be used to locate
the holes to ensure correct alignment of the holes.
12. Install a 5/8”-11 x 10-3/4”-long threaded anti-rotation rod through the holes in
the ground sleeve (and through the holes drilled in step 11, above).
13. Install four 5/8” washers and four 5/8”-11 nuts on the ends of the anti-rotation
rods.