Shift positions, 4wd auto, Neutral – Jeep 2013 Grand Cherokee User Manual

Page 471

Advertising
background image

Because four-wheel drive provides improved traction,
there is a tendency to exceed safe turning and stopping
speeds. Do not go faster than road conditions permit.

WARNING!

You or others could be injured if you leave the
vehicle unattended with the transfer case in the
NEUTRAL (N) position without first fully engaging
the parking brake. The transfer case NEUTRAL (N)
position disengages both the front and rear drive-
shafts from the powertrain and will allow the vehicle
to move regardless of the transmission position. The
parking brake should always be applied when the
driver is not in the vehicle.

Shift Positions

For additional information on the appropriate use of each
transfer case mode position, see the information below:

4WD AUTO

This range is used on surfaces such as ice, snow, gravel,
sand, and dry hard pavement.

NOTE:

Refer to “Selec-Terrain® – If Equipped” in “Start-

ing and Operating” for further information on the vari-
ous positions and their intended usages.

NEUTRAL

This range disengages both the front and rear driveshafts
from the powertrain. It is to be used for flat towing
behind another vehicle. Refer to “Recreational Towing”
in “Starting and Operating” for further information.

5

STARTING AND OPERATING

469

Advertising