Halogen headlamps – if equipped, Front turn signal – Jeep 2013 Grand Cherokee User Manual

Page 656

Advertising
background image

WARNING!

A transient high voltage occurs at the bulb sockets of
High Intensity Discharge (HID) headlamps when the
headlamp switch is turned ON. It may cause serious
electrical shock or electrocution if not serviced prop-
erly. See your authorized dealer for service.

NOTE:

On vehicles equipped with High Intensity Dis-

charge (HID) headlamps , when the headlamps are
turned on, there is a blue hue to the lamps. This dimin-
ishes and becomes more white after approximately 10
seconds, as the system charges.

Halogen Headlamps – If Equipped

1. Open the hood.

2. Turn the low or high beam bulb one–quarter turn

counterclockwise to remove from housing.

3. Disconnect the electrical connector and replace the

bulb.

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.

Front Turn Signal

1. Open the hood.

2. Turn the turn signal bulb one–quarter turn counter-

clockwise to remove from housing.

3. Disconnect the electrical connector and replace the

bulb.

654

MAINTAINING YOUR VEHICLE

Advertising