Cisco 7200 - Manual (Page 3)

Support Information for Cisco Routers
Cisco 7200 Series Routers
11
Cisco Active Network Abstraction 3.6 Virtual Network Element Reference Guide
OL-14112-01
Note Software versions marked with an asterisk (representing a wildcard) are supported by Cisco ANA 3.6.
Specific software versions that have been tested and verified are listed individually and marked as V.
Cisco 7200 Series—Supported Topologies
The following topologies are supported for Cisco 7200 Series routers in Cisco ANA 3.6:
• ATM counters
• IP
• Ethernet
• CDP
• MPLS
Cisco 7200 Series—Supported Modules
Table 8 lists the supported modules for Cisco 7200 Series routers in Cisco ANA 3.6.
IOS 12.0(26)S6 V
IOS 12.0(27)S1 V
IOS 12.4(11)T1 V
Table 7 Supported Software Versions for Cisco 7200 Series Routers (continued)
Software Version
Certification
Level
Table 8 Supported Modules for Cisco 7200 Series Routers
Module Name Module Description
Certification
Level
CX-FEIP-1FX 1-port fast ethernet interface processor (100FX) S
FEIP2-DSW 2-Port Fast Ethernet IP with Dist. Switching S
PA-FE-TX 1-Port Fast Ethernet 100BaseTx Port Adapter S
PA-4R-DTR 4-port dedicated Token Ring, 4/16 Mbps, half
duplex(HDX) or full duplex (FDX) S
PA-2T3+ Two-port clear-channel DS3 port adap S
VIP2-50 VIP2; Model 50 S
GEIP Gigabit Ethernet Interface Processor S
PA-4R-DTR 4-port Token Ring Port Adapter S
PA-8E 8-Port 10BaseT Ethernet Port Adapter S
PA-4E 4-Port 10BaseT Ethernet Port Adapter S
NPE-100 Cisco 7200 Series Network Processing Engine
100 S